Updating to 70.00.335+ requires a serial connection during the update to maintain root access.
- You will need: the “update.up” file, id7_recovery_xx, computer connected via serial connection, Putty or SecureCRT
- copy the “XX” folder onto the usb drive along with the update file
- Make sure your serial console is working properly and start the update. You can leave the console running during the update
- When the update is finished the text will stop completely. After the update is complete, copy & paste this command:
4o
cp -r /mnt/sd*/XX/* /mnt/data_persist/dev/bin/; chmod +x /mnt/data_persist/dev/bin/autorun; /mnt/data_persist/dev/bin/autorun - Don’t worry about the error messages and after a minute turn ACC off and on again. (Optinal: keep serial console running in case something went wrong)
- Make a tweaks installer with AIO and test. If it works then you are done with the serial connection and can clean up
- If it does not work, keep the serial console open and try to login with cmu/jci and run sh /mnt/data_persist/dev/bin/autorun
Navi-World accepts no liability for any damage, loss, or consequences that may arise from the use of this guide. All actions taken based on the information provided are done strictly at your own risk.
0 Comments for “Fiat 124 Spider firmware 70.00.335+ ID7_Recovery_XX”